HVAC Energy Optimization The Proven Power of Ceramic Clearcoat Tech

Reduce Energy Costs and Transform Your HVAC System into an Air Purifier

In today’s commercial and educational environments, facility managers face a constant battle against rising energy bills, system inefficiency, and deteriorating indoor air quality (IAQ). Standard maintenance often only slows the decline. What if a single, simple application could reverse efficiency loss, drastically cut your kilowatt-hour (kWh) usage, and actively clean the air in your building? Introducing SIMIX Multi-Surface Ceramic Clearcoat—the next-generation HVAC Energy Optimizer and Anti-Corrosion Inhibitor. Reduce Energy Costs and Transform Your HVAC System into an Air Purifier

SIMIX is a breakthrough solution that moves beyond traditional protective coatings. It is engineered to improve the ability of any new or old unit to produce dramatically colder and fresher air, providing a payback often realized in just 3 to 9 months. This technology not only protects your capital investment but directly addresses your building's operational costs and sustainability goals.

The Proven Results: A Case Study in Energy Savings Hard Data:

kWh Reduction Highlights The Science of Superior HVAC Performance:

Why SIMIX Works

1. A Conductive Ceramic Glass

2. Filling the Microscopic Gaps

3. Hygroscopic Evaporative Cooling4. SPOT-ON™ Air Purification TechnologyAsset Protection and Indoor Air Quality (IAQ)of text...

The true measure of a product’s effectiveness is its impact on the bottom line. The ALA Gilbert South Pre-K-6 Elementary Charter School in Arizona provides a compelling, real-world example of the profound savings possible with SIMIX.

This 59,300 square-foot campus relies on an extensive HVAC system, including forty-four (44) 9-year-old Trane™ RTUs, totaling 215.5 tons of cooling capacity. Like many aging systems, these units were losing efficiency. To combat this, the school’s Director of Facilities, Russell McArthur, and his team cleaned and treated all 44 units with SIMIX Multi-Surface Ceramic Clearcoat.

The application was straightforward: two initial coats were applied to the condenser and evaporator coils, as well as the condenser fan blades, with a third coat following several months later for energy optimization. The results were immediate and sustained, providing significant kWh reduction during the crucial cooling and heating seasons.

The comparative data shows the energy consumption difference between 2024 and 2025 following the SIMIX application. Even with fluctuations in average ambient temperatures, the school experienced massive reductions in energy usage:

• May: The most dramatic reduction was a 33.4% kWh savings for the month of May, translating to a massive 16,320 kWh less used than the previous year.
• June: As the Arizona heat intensified, the school still saw a 29.84% reduction in kWh usage, saving 13,680 kWh.
• February: A strong performance in the colder months resulted in a 25.69% kWh reduction.
• March: Consumption dropped by 20.98%.
• January: The earliest savings recorded show a 15.92% kWh reduction.

By extending the life of their equipment and achieving dramatic energy conservation, the school is taking a major step toward reducing its Net Carbon Footprint. The documented energy savings underscore the product’s power to lower energy bills by 15%–25% or more and extend the life of A/C units.

SIMIX Ceramic Clearcoat is a revolutionary product because it directly addresses the root cause of HVAC efficiency loss—corrosion and air pollution—without insulating the coils. Most coil coating products act as insulators, which hinders heat transfer. SIMIX does the opposite:

SIMIX Multi-Surface Ceramic Clearcoat is a permanent, non film-forming, super-hard liquid glass that will never yellow, chip, peel, or crack. Its primary ingredients are silica (sand) mixed with highly conductive potassium and lithium. Crucially, SIMIX conducts heat and pulls it away from the coils, restoring and exceeding the unit’s original heat-transfer efficiency.

Air conditioners begin losing efficiency the moment they are installed due to the expansion and contraction of tubes and fins, which creates tiny, microscopic gaps. Airborne corrosive particles and salt ions enter these gaps, corroding the unit and making it less efficient. SIMIX fills in these microscopic gaps, leaving behind a smoother, protective surface that significantly improves heat transfer and improves air flow.

SIMIX is hygroscopic, meaning it has a continual process of attracting and adsorbing water molecules from the air to the surface. This process facilitates evaporative cooling, which actively draws heat from the coils.

The patented Sustainable Photocatalytic Oxidation Technology (SPOT-ON™) makes SIMIX more than just an HVAC coating; it transforms your system into an AIR PURIFIER that works constantly. This technology uses titanium dioxide, a safe, naturally occurring compound inside the clearcoat. As light (natural or artificial) reflects off the coated surface, the technology:

• Converts water vapor into a radical form of hydrogen peroxide (the "detergent" of the atmosphere).
• Breaks down greenhouse gases, airborne allergens, germs, viruses, and mold.
• Destroys all foul musty odors and eliminates Dirty Sock Syndrome.

Beyond energy savings, SIMIX delivers critical benefits for facility longevity and occupant health, making it an essential anti-corrosion solution.

• Corrosion and Salt Damage Prevention: SIMIX creates a permanent shield that prevents corrosion caused by salt air, air pollution, and moisture, adding years to the life of your equipment and reducing capital expenditures.
• Microbial Control: The Clearcoat maintains a permanent, safe, high pH surface (12.3) that is inherently hostile to microbial growth. Mold, bacteria, and most germs cannot exist on surfaces with this alkalinity, which significantly prevents Legionella and cuts down on sick days.
• Reduced Maintenance Time (PM Time): The smooth, high-pH ceramic surface keeps units cleaner longer, resisting dirt, grime, and airborne kitchen grease build-up, which can lead to a reduction in PM time.

SIMIX Multi-Surface Ceramic Clearcoat is a cost-effective, easily applied solution to your most pressing facility needs, offering a quick return on investment while delivering real sustainability and clean, fresh air.

HVAC Energy Optimization The Proven Power of Ceramic Clearcoat Tech

HVAC Energy Optimization The Proven Power of Ceramic Clearcoat Tech